Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: GSXR1000 K8 ECU remapping - please help.


Newbie

Status: Offline
Posts: 1
Date:
GSXR1000 K8 ECU remapping - please help.


Hi everyone, just  a quick question for you all.

I've seen that this site had a vast amount of information but I'm struggling to find the right answers.

I have a friend with a GSXR1000 K8 2009, he's just bought it but it's not idling right. The person he bought it off fitted an exhaust and removed/drill out the baffles resulting in very little back flow and causing idling issues. He's asked me to look into remapping the ECU for him to accommodate the way it's been set up, ECU was never corrected by the previous owner. I already have a standard FT232R OBD K-Line USB adaptor, obviously I need the adaptor to go between that and the bikes ECU connector as well as the software to enable me to do this for him. I'm kinda working on a tight budget too, the other cable I can make up myself but wondered if it was a case of just connecting everything to a laptop with the correct software or if there was another module I needed to buy too. Oh and what software would be the right one?

Thanks in advance :) 



__________________
Cbx


Veteran Member

Status: Offline
Posts: 31
Date:

Give me your mail address....

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard