Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: ECUeditor nitrous issues


Newbie

Status: Offline
Posts: 1
Date:
ECUeditor nitrous issues


I have a gen 1 that has been converted to gen 2 electronics with a boostbysmith nitrous harness... the bike was tuned 2 years ago on motor when I did the elec conversion, I just recently tried to make a nitrous pass, but if I turn nitrous on in the map and flash the ecu, the bike starts idling horribly lean (wego reads 19.5) and it barely idles... afr gets back to normal around 3krpm and up, but the bike will not idle correctly. If I turn the nitrous off, it idles just fine (around 12.7:1 afr). I have traded several emails, including my BIN file with Greg Smith, and he is as stumped as I am. I have tried another known good ECU with the same results, updated editor and started a new bin file, copying all of my old tables through Excel. I've even added 34% fuel at idle to TPS and IAP tables and it doesnt change the lean condition... anyone else experienced something like this?



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard