Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: ZX12R ECU Help


Newbie

Status: Offline
Posts: 3
Date:
ZX12R ECU Help



HI, I was hopiing someone could help me with a ECU problem.

I bought a 2005 ZX12R at auction, and it didn't come with any keys. I'm in Austalia and the bike has a immobiliser system.

I bought a U.S. ECU on e-bay, which dosen't us the immobiliser system.

 I still can't get the bike to start. There are some differences in the wiring harness, one being the US model requires a voltage to pin 6, which I've done. I can't get a ground to the fuel pump, or signal to the coils.

Any information would be greatly appreciated.

Thanks
Patrick


__________________


Guru

Status: Offline
Posts: 963
Date:

I don't know about the 2005 but the 2000-2003 require a 150 ohm resistor between ECU pin 39 to and +12V. The schematic shows pin 39 just going to the ignition switch but there is actually a resistor in the switch.



__________________


Newbie

Status: Offline
Posts: 3
Date:


The 2005  has a similar set up, but it is pin 6. Before I intalled the resistor the FI, light would flash when cranking. Now it dosen't, but still no spark.

I must be over looking something


__________________


Member

Status: Offline
Posts: 8
Date:

did u sort this out

__________________


Member

Status: Offline
Posts: 16
Date:

how you going did you get pass the imobiliser love to know got the same dramas with gsxr1000 k6 very frustrating

__________________
kjholland


Member

Status: Offline
Posts: 8
Date:

cant bypass imobiliser yet working on now,
but can reprograme as many keys as u want
inc red master key to any bike.
but need some type of proof of ownership

-- Edited by dustymods on Sunday 8th of November 2009 01:47:18 PM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard