Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: has anyone done an 01-02 1000 yet


Member

Status: Offline
Posts: 19
Date:
has anyone done an 01-02 1000 yet


anybody reflash an early 1000, i thought i read somewhere that somebody has done it

__________________


Guru

Status: Offline
Posts: 741
Date:

i heard the same thing and another board but so far i have not seen anything to varify that claim, i was wondering how hard it would be to convert my 02 1k to work with 05/06 electronics...

__________________


Veteran Member

Status: Offline
Posts: 73
Date:

whtrthanu wrote:

anybody reflash an early 1000, i thought i read somewhere that somebody has done it




 Dear whtrthanu ,

I'm opening in this days, the 1000 GSX-R and 750 GSX-R 2000-2003, i will post few pictures later when I open the case.


Best rerds

Christian Piasini
R&D Piasiniengineering



__________________
Christian Piasini


Guru

Status: Offline
Posts: 741
Date:

cool, any updates? 

__________________


Veteran Member

Status: Offline
Posts: 73
Date:

YES, I open it.

late this evening I will add pictures.


MCU and port to read/write.


Best regards


CHristian Piasini
R&D Piasiniengineering


__________________
Christian Piasini


Guru

Status: Offline
Posts: 2338
Date:


Cool, you open it and publish the information then we can hack and put all the info in ecueditor for public use - OK ?


__________________

When asking a question, you can also consider posting it to facebook:

http://www.facebook.com/ecueditorcom



Veteran Member

Status: Offline
Posts: 73
Date:

PetriK wrote:


Cool, you open it and publish the information then we can hack and put all the info in ecueditor for public use - OK ?



YES, I what I will do Petrik.

Best regards

Christian Piasini
R&D Piasiniengineering

 



__________________
Christian Piasini


Guru

Status: Offline
Posts: 546
Date:

Don't you have to cut into the board to reprogramme the 01-02 ?? like the 99-00 busa

i have upgraded to the 03-04 ecu waiting and hoping that the reflash would become available at some point

__________________


Veteran Member

Status: Offline
Posts: 68
Date:

Do the 40F and 18G ECU's interchange without changing the wiring harness?

__________________


Guru

Status: Offline
Posts: 546
Date:

Crank rotor update , and ecu, wiring ....been told nothing needs changing but i do see some slight differences in the wiring diagrams, the 03-04 have an extra circuit

__________________


Guru

Status: Offline
Posts: 2338
Date:


Thank you Christian for your promise, now we are anxiously waiting for useful information on this board for the good of the forum users.

Maybe you can also release the firmware of ecus you have opened and published here ? I am sure that many of us would really appreciate some information to this direction too, not only advertising the commercial products.

Sorry for OT.


__________________

When asking a question, you can also consider posting it to facebook:

http://www.facebook.com/ecueditorcom



Member

Status: Offline
Posts: 21
Date:

I have a Yoshimura K2 GSXR1000 ECU that doesn't run the fuel pump anymore.

I thought someone might want to suck the software out of it and see how they dissable the STV's, SET, and run the powershifter ?

Anyone ?

__________________


Guru

Status: Offline
Posts: 741
Date:

christian_piasini wrote:

YES, I open it.

late this evening I will add pictures.


MCU and port to read/write.


Best regards


CHristian Piasini
R&D Piasiniengineering



any updates?

 



__________________


Newbie

Status: Offline
Posts: 3
Date:

Does anyone know where I could find any info for this? Not a full solution, just some pointers on getting started.... must be a fair few GSXR1000 K1/K2's out there

__________________
cq


Newbie

Status: Offline
Posts: 2
Date:

just wondering if there was any information on the 02 GSXR-1000 ECU flashing.

__________________


Veteran Member

Status: Offline
Posts: 65
Date:

Hi guys,

Just wanted to let you know that we have hacked into the 16bit GSX-R ECUs using OBD-II (K-line). We've done most of our testing 600 and 750 ECUs, but have also dumped the 40F30-0820. Check out this post:

    http://ecuhacking.activeboard.com/t56202335/32920-35fxx-16bit-gsxr-750-ecu-finally-hacked/?page=1&sort=newestFirst

 

We also have a utility to read (or reset) the NV ram that stores the YAMFS (Yoshbox/Teka) settings...

 



__________________


Member

Status: Offline
Posts: 21
Date:

We now have definition files for GSXR1000 K1/K2 40F30 & 40FE0

You can get files from here:
sites.google.com/site/lukethompson750/ecu-hacking/files

If you download these & use them let me know if it works ok?



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard