Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 68HC(9)16 BDM Programmer!


Senior Member

Status: Offline
Posts: 144
Date:
68HC(9)16 BDM Programmer!


Hi there,

 i bought a TL1000R recently and i can't resist to hack the ecu! The fact that it is a 16 bit unit makes it more expensive to hack than the 32 bit units! You need to buy a commercial cable and software solution, about 200$! I asked my self and thought that i should give it a shot with starting programming a software that could do exactly the same using a LPT to BDM adapter, costless!
 The problem is that gaining access to LPT port from WinXP is a little difficult. I am not an experienced programmer! I am reading a loooooot and going step by step in this project! I am programming in vc++ and vb! I need to build a driver with all the programming routines of the HC16 and the BDM! Any help would be really great from anyone!
 The easy part is already made! A front GUI with open, save, upload, download is completed. The hard part is the LPT and BDM drivers! If anyone can contribute in this that would be great!

Thanx!



__________________

For your DIY or Professional tuning needs be sure to check out
PVTech ECU Research & Development



Senior Member

Status: Offline
Posts: 144
Date:

The project continues and i am doing baby steps. Too much reading and searching in this one as i have to learn a lot new things. RR where are you, i need your input and your programming skills!!!

__________________

For your DIY or Professional tuning needs be sure to check out
PVTech ECU Research & Development



Senior Member

Status: Offline
Posts: 144
Date:

I finally made it!!!
The application resets the MCU! I changed my code and it finally reseted it! At least this is what it receives on the Status Port address!!

So I am progressing more than i thought!!! It actually resets and stops the chip!
This is good! Now I need to read the data from the mcu! The code from the source files don't work so i need to write my own but i don't know how! Maybe it is the serial clock that doesn't work but i can't tell for sure! Can anyone give suggestions??? I will try to copy and adjust the serial code from newer bdm source files which are for 683xx MCUs! I think that they are pretty much the same! Then will go for write, erase and verify functions!!!

I am waiting for suggestions!

TL1000R Programmer
This doesn't do any harm on the ECU. I tested it on mine! The read and write crash the program and the erase and verify do nothing, just there for future use!

__________________

For your DIY or Professional tuning needs be sure to check out
PVTech ECU Research & Development



Member

Status: Offline
Posts: 9
Date:

Your link doesn't work. Can you send me your code and design? I'll see if I can help.

Jack

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard