Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 2006-2008 Pinout


Guru

Status: Offline
Posts: 963
Date:
2006-2008 Pinout


Here is the pinout for the 21175-0100 EX650 2006-2008 US/CA ECU

Pinout in PDF format

 

ex650_003.jpg



__________________


Guru

Status: Offline
Posts: 963
Date:

Here is a pdf schematic for a bench flash cable for the 21175-0100

EX650FlashInterface.pdf

 

For software use Renesas FTDI. See threads on flashing early busa, or k5/k6 GSXR 1000s.

 WARNING!!

This is a new bike so there may be first time flashers reading this.  Be aware that connecting with FTDI automatically erases your ECU. Don't connect if you don't have a binary file ready to flash back into it. (Don't connect just to see if your cable works.) You can not read the ECU with the cable shown, only write to (flash) it.


To read out these ECUs requires cutting open the ECU. See this thread



-- Edited by RidgeRacer on Thursday 14th of July 2011 02:00:44 AM

__________________


Newbie

Status: Offline
Posts: 4
Date:

i have a ER650f2005 at school , i want to read the ecu but without cutting i know that piasini can do it! did anybody know the pin they use!

i suppose that it can be done using vss vcc kline and maybe a boot pin (vcc or vss) only but connected to which pin?



__________________


Senior Member

Status: Offline
Posts: 350
Date:

When FDT connects to the ecu via serial it loads an microkernel into the mcu, in this kernel you got an "erase" command.
If you can disable/remove the erase command you should be able to connect without FDT erasing the rom.

If i remember correctly there was no read/write commands implemented in Suzuki SDS/K-Line. Maybe Kawa does?


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard