Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Confirmation of pinout on 05 zx10r


Veteran Member

Status: Offline
Posts: 25
Date:
Confirmation of pinout on 05 zx10r


Before i hook up and fry my ecu can anyone conferm that pin 1 is TX and pin 14 is RX on a US spec 2005 zx10r ecu? Im 90% sure pin 20 is +12v and pin 59 is Ground. The other two pins i think might beáTX,RXáwould be 25 and 48 but not sure.



-- Edited by bugman53 on Monday 18th of March 2013 12:11:08 PM

__________________
High velocity Cycles Greensboro NC


Senior Member

Status: Offline
Posts: 350
Date:

Denso ECU with SH705x MCU?

Are FWE and possible MD pins for bootmode identified besides 1,14,25,48? Else probably two are those.
As long as you are sure on the power supply you should not fry anything hopefully.
5V inputs all 4 so you should be able to hit and miss without doing damage, nothing i dare to guarantee though.

Got a Picture of it? If its similar to any known ecu, programming pins are sometimes same even though sensors, actuators etc. differs.

__________________


Senior Member

Status: Offline
Posts: 179
Date:

Hi

NO-Denso ECU!



__________________

http://motorsport-brix.de/



Senior Member

Status: Offline
Posts: 350
Date:

Brix: Mitsubishi? Do you know wich MCU?
K-Line and flash voltage then? Or how is it?

__________________


Veteran Member

Status: Offline
Posts: 25
Date:

Thanks so much for the replys! Here is pic of the ecu.

á

á

It is a Mitsubishi SH7052 based. The pin 25 is listed as external communication mode switch? 1,14,48 are listed as external communication. As long as i don't fry it ill just hook it up and see what happens. I have a pasini box but no pin out as to how to hook it up. From what I can tell it this ecu uses k-line and flash voltage to program through the harness no aud port but i think it can also be flashed with a rs232-ttl device if you have the bin file.



__________________
High velocity Cycles Greensboro NC


Senior Member

Status: Offline
Posts: 350
Date:

Sorry dont have anything on Mitsubishi ECU...
Do you have K-Line and flash voltage identified besides the 4 external com pins?
Always wondered if the Mitsu K-Line programming ecu┤s also had serial pins in the connector... Can you read the SH Mitsu through K-Line also, or is it just writing?

For serial you will need at least TX/RX, and set it it bootmode with usually just FWE. Maybe MD pin too.
But remember, if you successfully connect to 7052 in serial bootmode it will ERASE the rom. So make sure you got the stock .bin first!
Flash voltage might set it to bootmode but needs to be measured. Only a game of guessing pins unless measuring to MCU pins to check.

Lets hope someone have the pinout and can clarify a bit...

__________________


Veteran Member

Status: Offline
Posts: 25
Date:

I think i got it. Pin 59,60 is ground, pin 20 and 24 are +12v, pin 14 is k line, pin 1 is flash voltage. I dont know if i can pull the bin file yet but we will see.

__________________
High velocity Cycles Greensboro NC


Senior Member

Status: Offline
Posts: 350
Date:

Nicely!

Anyone knows if there are any opensource Kawasaki K-Line programmer?
Or do you think you could sniff the line while doing a read and a write? With same file so maybe we can filter out commands if they are not known already.
Since all the other stuff piasini clone can do also can be done with simple 10EUR cables? EE SDS interface or any K-Line circuit would do, interface wise i guess?

__________________


Veteran Member

Status: Offline
Posts: 25
Date:

I got the bin file. How do i post itá up here?



__________________
High velocity Cycles Greensboro NC


Veteran Member

Status: Offline
Posts: 25
Date:

download_button.png


Here is the file uploaded to filedropper.

Enjoy.

__________________
High velocity Cycles Greensboro NC


Member

Status: Offline
Posts: 9
Date:

hi can you please send it to meá

joao.reiamaro@gmail.com

á

thanks

Joao Amaro



__________________
Joao Amaro
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard