Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Couple Questions!


Member

Status: Offline
Posts: 17
Date:
Couple Questions!


Hello,

 

I have a K8 1000 with GEN 2 BIN File Tuned by Schnitz Racing. My bike is a nitrous bike, everything works perfect. I would like to add a wideband gauge to monitor my A/F Ratio. What all is needed? I know I need an Oxygen Sensor and a Gauge, do i need to buy a wideband controller as well or is that do able through ecu editor or WR Software? Also what is needed to get the auto tune feature working?



-- Edited by DenisTheMenace on Tuesday 28th of May 2013 01:13:03 PM

__________________


Guru

Status: Offline
Posts: 1233
Date:

Hi, yes you need both the wideband o2 sensor and controller. You then need to enable wideband o2 sensor in advanced settings in Woolich Racing Tuned and route the 0-5v analog wideband output from the controller into the stock O2 sensor pin on the ECU. 

http://www.woolichracing.com/FAQItem.aspx?Id=4

http://www.woolichracing.com/FAQItem.aspx?Id=5

 

Easiest way to get the autotune working is to use a Woolich Racing Log Box to log data, then you can import this data directly into the Woolich Racing Tuned software.

http://www.woolichracing.com/LogBox.aspx



__________________

site_logo_small.png

www.WoolichRacing.comTune your bike to the Limit with our Advanced ECU Flashing Products



Member

Status: Offline
Posts: 17
Date:

Hi Jake,

 

Thanks for the fast reply. I downloaded the WR software and I see a few things different from ECU Editor. Does WR offer Nitrous Control? Air Shifter?



__________________


Guru

Status: Offline
Posts: 1233
Date:

Not currently, but you can create the bin file in ecueditor, make the changes to enable nitrous and shifter, then open the file in WRT.



__________________

site_logo_small.png

www.WoolichRacing.comTune your bike to the Limit with our Advanced ECU Flashing Products



Member

Status: Offline
Posts: 17
Date:

if i create the bin file in ecu editor enabling nitrous and shifter then open it in WRT, will it still have the nitrous and shifter enabled when i flash to ecu?



__________________


Guru

Status: Offline
Posts: 1247
Date:

DenisTheMenace wrote:

if i create the bin file in ecu editor enabling nitrous and shifter then open it in WRT, will it still have the nitrous and shifter enabled when i flash to ecu?


 Yes it will. If you are going to try WRT, I wodul create a backup file on your desktop for Ecu Editor.

 

You can continue to use Ecu Editor for shifter and nitrous modifications as well and use WRT to check the map "smoothness" graphically if you like. 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard