-- Edited by amissy on Sunday 3rd of November 2013 07:25:07 PM
In the micro 2 without problem I can ent
You can not read by Pin`s-you have erase the Chip! You must read by Aud-Port.
Just to know you have erase your ecu connected with FDT
Amissy are you sure that you can read the micro 1 and micro 2?SH705x processors dont support that. They only allow you to erase first and then write to them.If you read carefully your second post you will see that you erased the micro 2.Downloading and verifying micro kernel...Device is erasing...Erase Timeout value set to 11 secondsErase Successful
Downloading and verifying micro kernel...Device is erasing...Erase Timeout value set to 11 secondsErase Successful
Only custom bootloader/firmware can help you read the contents of the ECU but this is another story....
For your DIY or Professional tuning needs be sure to check outPVTech ECU Research & Development
XML for R6