Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: PAIR output control on GEN1


Newbie

Status: Offline
Posts: 4
Date:
PAIR output control on GEN1


All,

 

I would like to control my PAIR output to drive a relay. In EE, in the "shifter" section, we are allowed to control PAIR as an output control according gearing.

One setting is available for Gear 1 and 2 and a second one for the other gears. My problem is the activation RPM is too high for my application. I would like a mnimum RPM of 2000 RPM instead of 8000 or 9000 RPM.

In the source code found on BitBucket, I have found the relevant part of code. How can I recompile the code with the mods done and how can I change those values ?

Thanks a lot for your inputs. Jérémy

 

        If C_PairRpm12.Items.Count() = 0 Then
            C_PairRpm12.Items.Add(Int(ReadFlashWord(_SOLRPM12) / 2.56))
            For i = 8000 To 12000 Step 100
                C_PairRpm12.Items.Add(Int(i))
            Next
            C_PairRpm12.SelectedIndex = 0
        End If

        If C_PairRpm36.Items.Count() = 0 Then
            C_PairRpm36.Items.Add(Int(ReadFlashWord(_SOLRPM36) / 2.56))
            For i = 9000 To 12000 Step 100
                C_PairRpm36.Items.Add(Int(i))
            Next
            C_PairRpm36.SelectedIndex = 0
        End If


__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard