Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Piasini vs Ktag


Member

Status: Offline
Posts: 21
Date:
Piasini vs Ktag


Hi...

With piasini is possible read che DENSO-KAWASAKI ECU (es.: 21175-0341) only from pinout or you must open the ECU cutting it ?

I ask this because with KTAG and renesas adaptor (144300T107) is possible read the ecu directly from pinout, but i don't have the "renesas adaptor n 144300T107".

Or is there some interface that allows the reading directly from the pinout as an alternative to Ktag?
Who can help me?

Thanks very much.



__________________


Veteran Member

Status: Offline
Posts: 26
Date:

Mike82 can get the wiring for ktag here: www.alienshop.it/index.php otherwise you can control the output signals from Ktag and build yourself alone adapter, the signals that you need are:
+12v
Ground
Tx
RX
Fwe (+5v)
Reset

Also I'm looking for software to read ecm with M32R through pinout, any help is appreciated.

__________________


Member

Status: Offline
Posts: 21
Date:

Alienshop sell only to customers Alientech with official equipment, with serial number of the original product.

It 'hard to find this adapter elsewhere unfortunately.

To connect via pin FTDI interface exists, but connecting it erases the FLASH automatically and therefore allows ONLY writing. A rough ride.
I had a way you would help gladly.


__________________


Veteran Member

Status: Offline
Posts: 30
Date:

Rainbow cable 144300T104 color same ?

https://yadi.sk/i/lTH8_m9bj7iew



__________________


Veteran Member

Status: Offline
Posts: 26
Date:

The ecm 21175-0341 should be read through port AUD as it mounts a CPU sh7054.
If you have the file you can write through pinout without cutting the ecm.
To write the file you do not need the k-tag but you just follow the instructions to reflash Hayabusa 2002- 2007 via the USB cable ttl.

__________________


Member

Status: Offline
Posts: 21
Date:

Not exactly.
The colors are similar but different functions.

144300T104 not have RXD & TXD.
This adaptor is used for internal connector AUD.

144300T107 is used to write by pinout with a RXD & TXD signal. With some ECU can be read from the pin.
This adaptor i think is similar to FTDI interfaces...usb<-->serial.
But I can not explain how it can do the reading. I saw live use and in fact with adapter read directly from pinout. It would be interesting to do it do me.



__________________


Veteran Member

Status: Offline
Posts: 26
Date:

Try to buy here: www.turboperformance-shop.de/detail/index/sArticle/22377

__________________


Member

Status: Offline
Posts: 21
Date:

Thanks for this link.
Please read your personal PM in this forum.
Thanks

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard