Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Super Charged Methanol Lean 8500+


Member

Status: Offline
Posts: 7
Date:
Super Charged Methanol Lean 8500+


New Build.

GenII Super Charged Rotrex c38-91 Carpeneter Built For Methanol.

Fuel System. Fuel Tech dual speed pump 10AN out to filter to Fuel Tech regulator Y to 2 6an billet RC fuel rail.

Injectors. Primary OEM 270cc Secondary Injector Dynamics ID2000 cc.

Fuel PSI set to 60 psi and high speed pump at WOT with a 1:1 boost to regulator

Estimated HP 475-500HP

On the dyno I am lean around 8000?

Injector Balance set to 15% on primary and secondary should do 85%?

my TPS fuel map is MAXED out?

What would cause this? Does the ECU have a safe mode and cut the secondary injectors out at high RPM?



__________________
Yankee


Veteran Member

Status: Offline
Posts: 37
Date:

Stock is 20-80 so you are not too far off,I don't think this is your problem.Are you sure you are not loosing pressure when the upper injectors open?

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard