|
Hayabusa Engine in Car - Wiring Question
(Preview)
I have a Hayabusa Engine mid-mounted in my car. I am in the process of doing some re-wiring and wanted to make sure I understand the issue regarding the clutch swith properly. As I understand it, if the original bike clutch switch is removed then idealy I should have a momentary switch to operate when st...
|
MiniBusa
|
0
|
1023
|
|
|
|
Hayabusa Engine in Car - Wiring Question
(Preview)
I have a Hayabusa Engine mid-mounted in my car. I am in the process of doing some re-wiring and wanted to make sure I understand the issue regarding the clutch swith properly. As I understand it, if the original bike clutch switch is removed then idealy I should have a momentary switch to operate when st...
|
MiniBusa
|
0
|
1012
|
|
|
|
Hayabusa Engine in Car - Wiring Question
(Preview)
I have a Hayabusa Engine mid-mounted in my car. I am in the process of doing some re-wiring and wanted to make sure I understand the issue regarding the clutch swith properly. As I understand it, if the original bike clutch switch is removed then idealy I should have a momentary switch to operate when st...
|
MiniBusa
|
0
|
1029
|
|
|
|
Yamaha MT-01 ECU Reading doesnt work
(Preview)
Hello everybody, please forgive me for my bad english. recently I have been dealing with ecu flash and find that very interesting. unfortunately I was not very successful so far. i have tried to read an MT01 ECU ( Mitsubishi ECU ) with the Piasini clone. It doesnt work. I thought, that maybe the Problem...
|
MT01
|
1
|
2018
|
|
|
|
problem to connect to busa gen2 ecu!
(Preview)
Hi,does anyone had the problem i have?I cannot connect to gen 2 busa ecu!I had no problem in the past,but now after i turn the switch to engine data an error coming up saying that (font arial narrow does not support style regular)!Any help will appreciate!
|
Michalis
|
2
|
1344
|
|
|
|
Yamaha R1 & R6 ECU remap mail in service and Interface Cables in Europe
(Preview)
Hi, I supply the above services in the UK if anyone is interested then please visit my website Mike Sales@veloxracing.com http://www.veloxracing.com VeloxRacing are the European Dealers for Flash-Tune Ecu remap interface cables and software
|
veloxracing
|
0
|
1294
|
|
|
|
Tuned bin database?
(Preview)
Hey guys. Wondering if anyone would be interested in starting a page with a list of tuned map bin's. I do a lot of bike tuning and have been doing some direct ecu flashing. I sure wouldnt mind sharing some of my maps and results on this site since everyone on here seems to be super helpful. Anyways I can host...
|
garth285
|
6
|
1581
|
|
|
|
gen 2 busa ecu dash compatibility
(Preview)
i was wondering will a 2008 gsxr 1000 dash work with a gen 2 ecu?
|
Yallgotboost
|
1
|
1248
|
|
|
|
08 gsxr 750 help
(Preview)
Hi, could someone please give me some help with a big problem? Last night I used the ecu editor to flash an 08 gsxr 750. All I did was turn off the gear restrictions and fuel soft cut. It said flash sucessfull, but when I flipped the switch to engine data something very strange has happened(I've done 3 gen2...
|
sixpack577
|
47
|
6653
|
|
|
|
SPAM Notice
(Preview)
Sorry for the recent spam posts. I went from manual user registration to automatic because they suppossedly offered more security features. So it's back to manual registration. Sorry for any delay in validating your registration, especially over the weekends, but its just not possible for me to m...
|
RidgeRacer
|
1
|
1131
|
|
|
|
K8 GSXR600 LAUNCH CONTROL, ECU EDITOR
(Preview)
hi im using ecu editor with good succes on a gsxr600 k8 engine with US version ecu, but now im having some isues on the launch control, its always on, even when i realese the clutch level. what are the conditions for the launch control? for example, rpm, Tps, clutch etc i work with megasquirts ecus, and o...
|
botasjr
|
0
|
1526
|
|
|
|
YCCT Conversion
(Preview)
I have designed on solidworks a Intake manifold for my Subaru sti powered 63 volkswagen bug, and figured out how to seperate 06 yamaha throttle bodies, with a linkage. Now my next thought the ecu to make it work with it being easily tunned it has a mechanical throttle plate as well to help with failsafe,...
|
valhalla
|
0
|
1280
|
|
|
|
ECM Pinouts Spreadsheet for all GSXR's
(Preview)
I have created a spreadsheet with ECM Pinouts, wiring colours, SDS & Yoshi connector pinouts for GSXR 600 (01-11), GSXR 750 (00-11), GSXR 1000 (01-11), Hayabusa (98-11), B-King (08-11). Please let me know if there are any errors so I can fix them. Note: This information can vary between countri...
|
luke111
|
6
|
22647
|
|
|
|
Lack of community support / interest
(Preview)
There seems to be a lack of interest in the user community for support, testing results, general comments, etc as related to ECU flashing. Per the internet forums, personal experience with the racing public, and as busy as Greg Smith has been since beginnning to sell pre-made interfaces, Flashing h...
|
sportbikeryder
|
11
|
2307
|
|
|
|
cordona quickshifter no kill
(Preview)
i have fitted a plug and play cordona quickshifter to a gen 1. Followed the instructions as suplyed all seems correct. Set kill time at 100 no kill 6th gear flashed the ecu .Set the strain gauge at 15 but do not get a kill little lcd lights when gearlever is used so take it the quickshifter is working .Stil...
|
stuart123
|
1
|
1905
|
|
|
|
how to change the forum format
(Preview)
I can't get used to the colors of the forum, is there anyway to get rid of the white on grey?
|
Dust
|
0
|
910
|
|
|
|
gsx r750 2001 FI tern on all the time???
(Preview)
I have 2 problems:The first is that the FI light is turning on all the time.The second problem is, on neutral when I push the throttle to the max it accelerate till 8000rpm and stop accelerate the engine is cutting off, but when I accelerated slowly it going up till the end.I took out the TPS connect...
|
Dollitle
|
0
|
1063
|
|
|
|
RomRaider interface ( scheme and wiring diagram ) '
(Preview)
Help Do you need to RomRaider special interface or you can use the same ECU as the editor? (If everything is the same as an editor for the ECU, then it is all clear) thank you
|
Gixer
|
25
|
3658
|
|
|
|
Wideband input voltages for ECU editor
(Preview)
I am using an innovate LC-1 and want to use 1 output to ecu input, not sure the voltage inputs?.. see below programming options for output? -- Edited by dkagan on Thursday 5th of April 2012 12:05:56 AM -- Edited by dkagan on Thursday 5th of April 2012 12:06:19 AM
|
dkagan
|
1
|
1224
|
|
|
|
Just a thought!
(Preview)
What everyone thinks about getting one moderator, that as things move forward would be able to put everything say for gen1 in one sticky to make it easier for newbies to guru's. Think it would make it much easier to promote ecu editor and make life easier programming. I would be more than willing to do it...
|
mtrotterjr
|
2
|
1187
|
|
|
|
Dashboard dump Suzuki boulevard C90T
(Preview)
Hi. Im looking up for 2007 denso dashboard dump (93c46-16bit.) for boulevard 1500 (C90T)
|
nkiller
|
0
|
1215
|
|
|
|
GSF 1250
(Preview)
Search a file for a GSF 1250th EU or U.S.. No Cali.
|
Brix
|
2
|
1273
|
|
|
|
Yamaha WR250 2010
(Preview)
Hi i wanna ask you, is there any solution for wr250 ecu. Here is the picture of the ecu, it uses gsxr plug so i think that there is a way to flash it. I've got a picture of cables that goes into ecu, but i'll upload tomorrow :)
|
nkiller
|
3
|
1650
|
|
|
|
2008+ Europe market Yamaha WR250X/R AIS/O2 and ECU
(Preview)
Hello! I have a great motard 2008 Yamaha WR250X, and I going to uncork bike's performance by doing AIRbox mod and Slip-on exhaust as described on many forums as well as at Yamaha's GYTR pages. I've doing a small research to figure out why EU models of WR250X/R equipped so well (?) with narrow-band (foun...
|
sasha
|
0
|
3525
|
|
|
|
2009 Yamaha R1 US spec ecu
(Preview)
New here and I'm finding this forum very interesting. I have some questions that hopefully I can get help with. I own a 09 Yamaha R1 and the US spec bikes have a the throttle by wire and above ~11,500 rpm the ecu cuts throttle to 80% even though the twist grip is 100%. So far the only two ways I know of around th...
|
97nismo
|
8
|
10363
|
|
|
|
K8 gsxr 1k flashing issues
(Preview)
I'm having a serious problem flashing k7 and k8 gsxr 1k's. Everytime I flash one it has issues afterwards. I can flash busa's with no problem but only the 1k is giving me issues. Example. I just finished tuning a k8 1k on the dyno with no problems. I flashed the ecu and only changes I made was enabling the ma...
|
kingofdacoast
|
12
|
2004
|
|
|
|
Help me?? Dump of immo kawasaki
(Preview)
Hello, can you help me?? this is a dump of 24c04 ecu kawasaki.
i want know where is the keys, and if i can erase its, writte the eeprom witout keys.
The ecu is mitshubisi
Regards & thanks & merry christmas!! -- Edited by Sinaloe on Thursday 22nd of December 2011 04:27:39 PM -- Edited by Sina...
|
Sinaloe
|
3
|
2464
|
|
|
|
Help before I shoot my bike Please
(Preview)
I am fighting a cold start issue 2002 busa ecu hack 1397 12.5:1 compression. Morning temps 47-49 degrees. Engine just cranks, Crack the the throttle may backfire out the exhaust, Hook a booster to the battery it fires.. Changed plugs,battery and coolant temp sensor. Any thoughts? FYI I have been f...
|
Ed L
|
7
|
1448
|
|
|
|
Fuel pump relay
(Preview)
Hello , i have a weird problem with my 2008 busa , the fuel pump has stopped buzzing now , previously it was an intermittent problem but now it has finally come to rest . On deep anlysis i found that the ground supplied from ECU is the absent , when i ground the wire going into the relay...
|
dukeriderofdawn
|
9
|
1600
|
|
|
|
Lost keys - what to do next ?
(Preview)
I am getting often a question of what to do if someone has lost his keys. Throughout the world there is one very easy process for this: 1) Contact your local police with your bike registration and VIN number and ask if anyone has returned a set of keys. Thats where the keys often end up in the first place. 2)...
|
PetriK
|
23
|
5681
|
|
|