Bandit 1250

RidgeRacer · RidgeRacer

Thanks to Gadget's hard work and determination here is the map file and RomRaider definition for a Suzuki Part# 32920-18H20 Which is the 2007/2008 GSF1250S California model. (I'm not sure if that makes it an S or an SA) Binary File RomRaider definition Definition version: v1.00 RR 11-20-08 P...

ratsplinter · ratsplinter

Can anybody help me out here please....have a 32920-17H00 ecu lying here, and dont feel like cutting it open. Anybody have a bin and definitions for this ECU ?

Likaibin · Likaibin

I really like the look of the bandit 1250 naked, does anyone have a naked bandit, that could tell me how do you find it in terms of handling and wind protection,ateq vt55 price is it that bad as some pe...

Gadget · Gadget

I was going to add this circuit to my propeller output for connecting to the SDS serial link on the ECU. It uses 2N3904 transistors but is designed for 12 volts. Don't the resistor values need to be cut down for 3.3/5v? I'm not sure of the values. I was guessing about 1.8k for R1 and R2 since they see 5v, and 8...

Brix · Brix

Finish-XML -- Edited by Brix on Thursday 14th of March 2013 04:27:23 PM

Gadget · Gadget

I haven't heard of anyone else working on the 07/08 Suzuki Bandit ECU, so I'm going to see what I can accomplish with it. I've picked up a tremendous amount from this website already, hopefully I can put it to good use when I find a donor ECU for that first download. Thanks everyone for your efforts here an...

Geri_Pete · Geri_Pete

Bit of an odd question for you guys. I have a set of FI clocks from a K7 Bnadit, fitted to my K4 carb model. Everything is ok except the odometer is unreadable due to it reading CHECK, which is the message that the FI bike is not ready for starting (run switch off etc). The only un-traced wire I have to the cloc...

paddy · paddy

does any one know to derestrict bandit 650 k7 i have done my old bandit and a k7 gixer by cutting a wire going to cdi unit. wondering if the bandit was the same

Brix · Brix

Stock and open.

Martin · Martin

Hi guys! I'd like to ask you my friends for such conversion as the subject. I've got FI Tuner Pro installed on my bike B12,5 with perfectly suited map to my mods - and it works perfect. Is it possible to do some sniff, conversion or something else that allow me to prepare pure ECU maps and flash it to my ECU?...

RidgeRacer · RidgeRacer

Has anyone actually reflashed one of these ECUs yet. I have no doubt that it can be done but has anyone actually done the deed yet? If so perhaps you could document which wire harness wires are which in terms of programming?

Gadget · Gadget

Just wanted to let everyone know I haven't fallen off the face of the earth... Some end of year/start of new year type stuff has me fully occupied at work, and now I'm heading for a much needed vacation in a few days. I should be back into the swing of things towards the end of the month. I did make a little pro...

RidgeRacer · RidgeRacer

I think I have found the RPM limiters. They are in two groups, most likely one for fuel and one for ignition given past experience. I have not had the time to totally go thru and figure which limits are which, which for neutral which are hard or soft ect. Would you guys rather I wait and post them when I know f...

Gadget · Gadget

This is way premature considering we're just starting to decipher the ECU, but I thought I'd put it out there in light of Geoff's post in another thread about the bandit "hitting the wall" so to speak. The graph below shows a bandit with stage 1 and stage 2 bolt on mods. The mods in stage 1 inclu...

Topic		Started By	Replies	Views	Last Post
	STICKY: Map Files GSF1250S(A) Bandit 2007-2008 (Preview) Thanks to Gadget's hard work and determination here is the map file and RomRaider definition for a Suzuki Part# 32920-18H20 Which is the 2007/2008 GSF1250S California model. (I'm not sure if that makes it an S or an SA) Binary File RomRaider definition Definition version: v1.00 RR 11-20-08 P...	RidgeRacer	26	12605	Apr 7, 2015 by amissy
	GSF650 anyone ? (Preview) Can anybody help me out here please....have a 32920-17H00 ecu lying here, and dont feel like cutting it open. Anybody have a bin and definitions for this ECU ?	ratsplinter	4	3438	Oct 16, 2018 by coma
	Bandit 1250 SA Vs bandit 1250 naked? (Preview) I really like the look of the bandit 1250 naked, does anyone have a naked bandit, that could tell me how do you find it in terms of handling and wind protection,ateq vt55 price is it that bad as some pe...	Likaibin	0	1711	Sep 10, 2018 by fifty
	SDS protocol ( 1 2 3 4 5 ) (Preview) I was going to add this circuit to my propeller output for connecting to the SDS serial link on the ECU. It uses 2N3904 transistors but is designed for 12 volts. Don't the resistor values need to be cut down for 3.3/5v? I'm not sure of the values. I was guessing about 1.8k for R1 and R2 since they see 5v, and 8...	Gadget	237	207131	Sep 25, 2017 by Shuky
	Suzuki GSX 1250 10- (Preview) Finish-XML -- Edited by Brix on Thursday 14th of March 2013 04:27:23 PM	Brix	1	3434	May 11, 2014 by tipi65
	Bandit 1250 ECU hacking ( 1 2 ) (Preview) I haven't heard of anyone else working on the 07/08 Suzuki Bandit ECU, so I'm going to see what I can accomplish with it. I've picked up a tremendous amount from this website already, hopefully I can put it to good use when I find a donor ECU for that first download. Thanks everyone for your efforts here an...	Gadget	57	30188	May 6, 2014 by dharry
	Where does the 'CHECK' signal come from? (Preview) Bit of an odd question for you guys. I have a set of FI clocks from a K7 Bnadit, fitted to my K4 carb model. Everything is ok except the odometer is unreadable due to it reading CHECK, which is the message that the FI bike is not ready for starting (run switch off etc). The only un-traced wire I have to the cloc...	Geri_Pete	0	2106	Nov 25, 2012 by Geri_Pete
	derestrict bandit 650 k7 with abs (Preview) does any one know to derestrict bandit 650 k7 i have done my old bandit and a k7 gixer by cutting a wire going to cdi unit. wondering if the bandit was the same	paddy	0	2501	Jul 15, 2012 by paddy
	1250 STV Map (Preview) Stock and open.	Brix	4	3518	Apr 22, 2012 by geofftl1000r
	FIT-Pro map to pure ECU maps conversion. (Preview) Hi guys! I'd like to ask you my friends for such conversion as the subject. I've got FI Tuner Pro installed on my bike B12,5 with perfectly suited map to my mods - and it works perfect. Is it possible to do some sniff, conversion or something else that allow me to prepare pure ECU maps and flash it to my ECU?...	Martin	0	2870	Jul 21, 2011 by Martin
	Programming Pin Out (Preview) Has anyone actually reflashed one of these ECUs yet. I have no doubt that it can be done but has anyone actually done the deed yet? If so perhaps you could document which wire harness wires are which in terms of programming?	RidgeRacer	13	8551	Feb 15, 2010 by Interceptor
	Checking in (Preview) Just wanted to let everyone know I haven't fallen off the face of the earth... Some end of year/start of new year type stuff has me fully occupied at work, and now I'm heading for a much needed vacation in a few days. I should be back into the swing of things towards the end of the month. I did make a little pro...	Gadget	0	2938	Jan 11, 2009 by Gadget
	RPM Limiters (Preview) I think I have found the RPM limiters. They are in two groups, most likely one for fuel and one for ignition given past experience. I have not had the time to totally go thru and figure which limits are which, which for neutral which are hard or soft ect. Would you guys rather I wait and post them when I know f...	RidgeRacer	2	3733	Nov 26, 2008 by RidgeRacer
	Tuning the Bandit (Preview) This is way premature considering we're just starting to decipher the ECU, but I thought I'd put it out there in light of Geoff's post in another thread about the bandit "hitting the wall" so to speak. The graph below shows a bandit with stage 1 and stage 2 bolt on mods. The mods in stage 1 inclu...	Gadget	0	4852	Nov 23, 2008 by Gadget
Page 1 of 1 sorted by