Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Unable to flash


Newbie

Status: Offline
Posts: 2
Date:
Unable to flash


Hi all,

I have problems with the flashing of the Gsxr k9 750. I have an connection with the ECU in terms of reading data monitoring screen. 

But when I want to flash I get the following message;

"Could not set Com port parameters. Programming aborted, set correct com port for the interface using data monitoring screen"

Looking at the coding of the program it is being caused by;

   FT_status = FT_Open(cp, lngHandle)
        FT_status = FT_ResetDevice(lngHandle, 3)                                'set device to default status
        FT_status = FT_status + FT_Purge(lngHandle)                             'clear rx and tx buffers
        FT_status = FT_status + FT_SetBaudRate(lngHandle, 57600)                'set speed 57600
        FT_status = FT_status + FT_SetDataCharacteristics(lngHandle, 8, 1, 0)   ' 8bits ,1 stop, parity none
        FT_status = FT_status + FT_SetTimeouts(lngHandle, 5, 5)               'rx and tx timeouts ms
        If FT_status <> 0 Then
            MsgBox("Could not set Com port parameters. Programming aborted, set correct com port for the interface using data monitoring screen")
            B_FlashECU.Enabled = True
            FT_status = FT_Close(lngHandle)
            Return

I have no idea what causes this. What can I try to get rid of this message en finally get some flashing action or even show me the failing step so I can dig further.


__________________


Veteran Member

Status: Offline
Posts: 36
Date:

Hi.

What kind of interface ?



__________________


Newbie

Status: Offline
Posts: 2
Date:

I use the interface from boostbysmith (v2.0)

 



__________________


Veteran Member

Status: Offline
Posts: 36
Date:

Try it with the USB TO UART(TTL) SERIAL CABLE without the whole interface! Maybe your interface has an issue.

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard