Members Login
    Remember Me  
Post Info TOPIC: Progress Report 10/2007


Status: Offline
Posts: 964
Progress Report 10/2007

I have really been doing a bad job of keeping this section current. There has been a lot of progress made and I started this site to be a brain dump of everything I've learned but I have really been slacking off.

So in the near future look for a lot of updates on ZX-12 programming, specifically How-To instructions on reflashing the ECU.

Also look for posts on:

Real world validation: Supra5677 is now running a reflashed ECU on his bike and likes the results very much.

Emulator: I built a bike 'emulator' that allows me to run the ECUs off the bike and experiment with different maps/features without putting the bikes at risk or wasting expensive dyno time.

Maps: Discussion on some of the easier things to change in a map like RPM limiter, speed limiter, and ignition timing

A/B maps: The ecu has two sets of maps that can be changed at the flip of a switch

Telemetry: The ecu has the hardware and software to realtime dump the rpm, sensor data, throttle position etc. It just needs to be turned on in the software.

-- Edited by RidgeRacer at 17:13, 2007-10-27

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard