Has there been anymore development on the 10 ecu? I would like to increase the rev limit to 13700 on my bike.
On a side note i remember some of the first zx10rs had a wire you could cut to disable the rev limiter but i have only seen this on 1 bike and the wire was looped out of the wiring harness. I believe this was a pre production bike.
If there is anything can do to help development here let me know I do quite a bit with IC and computer chips just never applied them to bikes.
Has there been anymore development on the 10 ecu? I would like to increase the rev limit to 13700 on my bike.
On a side note i remember some of the first zx10rs had a wire you could cut to disable the rev limiter but i have only seen this on 1 bike and the wire was looped out of the wiring harness. I believe this was a pre production bike.
If there is anything can do to help development here let me know I do quite a bit with IC and computer chips just never applied them to bikes.
YES, sure have the solution for you, if you own a ZX10R 2004 to 2009 model
tell me where you are locaed, I will tell you more details and where our ner partner is.
It seems the only options are Pay for reflash options? There are several companies that offer reflashing services from $400-750. I am just a weekend racer that is looking for a cheap way to give my bike a 1k rpm rev limit increase. Has there been any DIY development? Even tricks to fool the ECU into bumping up limit. My motor makes power all the way to the limiter and I should be able to get 5-8 more hp out of her.