Members Login
    Remember Me  
Post Info TOPIC: cordona quickshifter no kill


Status: Offline
Posts: 1
cordona quickshifter no kill

i have fitted a plug and play cordona quickshifter to a gen 1. Followed the instructions as suplyed all seems correct. Set kill time at 100 no kill 6th gear  flashed the ecu .Set the strain gauge at 15 but do not get a kill little lcd lights when gearlever is used so take it the quickshifter is working .Still no kill when ridden Any help would be apreceated


Senior Member

Status: Offline
Posts: 149

If the led on Cordona shifter flashes when you do an upshift the shifter is set up correctly.

Follow the instructions and perform an upshift to configure the unit for push or pull.

Check to see if your flash software is setup for 6th gear cut or not.

Other than that your shift time is way too long , try 60ms.

-- Edited by LenTurbo on Tuesday 29th of May 2012 05:14:41 AM

-- Edited by LenTurbo on Tuesday 29th of May 2012 05:17:47 AM

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard