Members Login
    Remember Me  
Post Info TOPIC: R1 2009 Shifter problems.


Status: Offline
Posts: 4
R1 2009 Shifter problems.

Hello guys,


Ok here is my problem:

After install YEC Kit ECU with standard harness in R1 2009 everything is working (pit limiter, map switch, etc.) except the shifter.

I want to put shifter in left hand switch (like horn button) so:


- Have connected one of two cables to the 33 of the little connector and the other switch cable to pin 25 (12V after key on), but it isnīt working.

- Have tried to give +2,5 + 5 and -5 V to the constant values of the YEC Matching System, but it is the same...


Please, who can help me?

Maybe this is really simple, but is making me die... 


Thank you for your time guys. 


Veteran Member

Status: Offline
Posts: 35

You have to ground the shifter-pin from ecu over your shifter-switch.


Veteran Member

Status: Offline
Posts: 44

has tried to put in constant / shifter on voltage -2.5

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to

Create your own FREE Forum
Report Abuse
Powered by ActiveBoard