You have to use a cable USB TTL 5V, and you have to use only 4 wires.
The black wire (USB TTL) is connected to ground
The brown wire (USB TTL) is connected to ground
The yellow wire rxd (USB TTL) is connected to TxD1
The green wire txd (USB TTL) is connected to RxD1
I bought the actual connector that the EMPRO interface uses and Im trying to make my own cable to be able to use on my 08 1000 and the 07 750 and the k11 600
I need to know where the Yellow/Green/Black/Brown from the TTL go on the actual connector I purchased.
Also can you tell me where to put the Blue/Yellow and the Blue/Green from the yosh plug on the SDS plug and if there is any other cable.
Bellow is the connector I purchased. i132.photobucket.com/albums/q12/EnVyCyCLeS/MT-6P-1_zpsrrkhbspq.jpg
To use the connector that you bought you need to move the wire , if you do not want to move you have to buy Kawasaki part number 26011-1773
The black wire (USB TTL) is connected to connector YoshiBox wire Black/Brown
The brown wire (USB TTL) is connected to connector YoshiBox wire Black/Brown
The yellow wire rxd (USB TTL) is connected to connector YoshiBox wire Blue/Yellow
The green wire txd (USB TTL) is connected to connector YoshiBox wire Blue/Green
if you want to use your connector you have to move the wires Blue/Yellow and Blue/Green from the cross connector Yoshi Box to connector SDS.
If you move the wires connections are:
The black wire (USB TTL) is connected to connector sds wire Black/White
The brown wire (USB TTL) is connected to connector sds wire Black/White
The yellow wire rxd (USB TTL) is connected to connector sds wire Blue/Yellow
The green wire txd (USB TTL) is connected to connector sds wire Blue/Green
To use the connector that you bought you need to move the wire , if you do not want to move you have to buy Kawasaki part number 26011-1773 The black wire (USB TTL) is connected to connector YoshiBox wire Black/Brown The brown wire (USB TTL) is connected to connector YoshiBox wire Black/Brown The yellow wire rxd (USB TTL) is connected to connector YoshiBox wire Blue/Yellow The green wire txd (USB TTL) is connected to connector YoshiBox wire Blue/Green if you want to use your connector you have to move the wires Blue/Yellow and Blue/Green from the cross connector Yoshi Box to connector SDS. If you move the wires connections are: The black wire (USB TTL) is connected to connector sds wire Black/White The brown wire (USB TTL) is connected to connector sds wire Black/White The yellow wire rxd (USB TTL) is connected to connector sds wire Blue/Yellow The green wire txd (USB TTL) is connected to connector sds wire Blue/Green