What pin is used to switch between MS0 and MS1?

The following pins are used to switch between MS0 and MS1. The switching between maps is done by installing a toggle switch to ground. One set of Map Selects will be selected when the pin is grounded, and another set will be selected when the pin is not grounded. You will need to test which maps are active for a particular switch position.

2002-2007 Hayabusa: pin 21 (larger plug) 
2003-2004 GSXR 1000: pin 21 (larger plug) 
2006-2010 GSR 600: pin 53 
2004-2005 GSX-R 600: pin 19 (smaller plug) 
2004-2005 GSX-R 750: pin 19 (smaller plug) 
2005-2006 GSX-R 1000: pin 57 
2006-2007 GSX-R 600: pin 58 
2007-2012 GSX-R 1000 : pin 66 
2008-2012 GSX-R 600 : pin 66 
2008-2012 GSX-R 750 : pin 66 
2008-2012 GSX1300R Hayabusa: pin 58 
2008-2012 GSX1300BK B-King: pin 58 
2005-2008 SV 1000: pin 44 (small plug pin 10) 
2009-2016 ZX6R (600): pin 51 
2004-2010 ZX10R: Light Green/Black wire in KDS Diagnostic Plug 
2006-2011 ZX14: Light Green/Black wire in KDS Diagnostic Plug 
2006-2008 ER-6N: pin 46 
2009-2015 ER-6N: pin 38 Green/Black wire in KDS Diagnostic Plug 
2013-2015 EX-300: pin 38 Green/Black wire in KDS Diagnostic Plug 

For Honda i also still find it .

Thanks