Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: K-tag and ecu hacking


Newbie

Status: Offline
Posts: 1
Date:
K-tag and ecu hacking


Has anybody investigated about using k-tag for 02-07 ecu reading and writing? Alientech support said that it should be possible to read and write 02-03 ecus cause they have tested it.



__________________


Newbie

Status: Offline
Posts: 1
Date:

Old post I know, but it may help someone.

I used a clone ktag to do mine but found you need a 75 cable....I'm scottish and tight so....

I bodged one.

ktagpinout (1).jpg

1 - brown
2 - red
5 - blue
6 - black
7 - yellow
8 - green

ecu cable (1).jpg

read1.jpg

read2.jpg

The issue with this, is the file size is different that romraider expects for the deffinitions. If you compare to the stock ori posted elsewhere here its just padded with FF to make up the correct file size. Ktag seems to read 384kb ( I assume entire MPC ) whereas the actual data area is 256kb so you need to pad it out when re-writing, and delete it to use romraider. I had help from a friend with this as tbh I'm not an expert.

I was hoping to see if anyone had derestricted theirs ( mines an 05 ) and done anything like change all gears to mirror 4th on a stock EU bike? I will be honest, I'm well out my depth here now.



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard